How to optimize hydration bladder supply chain management and improve product quality

The water nozzle and water inlet are the interfaces between the hydration bladder and the outside world, so it is necessary to buy standard products. The nozzle needs to be opened and closed easily. How to optimize the hydration bladder supply chain management and improve product quality.

● The nozzle design should be considered according to the needs of different areas. If the opening and closing time is not limited, the design of water nozzle can also be considered to achieve cleaning.

● The design of mouth should be considered according to the needs of different regions. It is only inconvenient to open and close.

● The design of mouth should be selected according to the needs of different regions. If you want to achieve greater use effect, you must consider a good well-known brand, otherwise it may cause the entire nozzle to crack.

● When using the nozzle, we need to draw water from the water pipe, and then put the nozzle on the ideal top, close it with a plastic hose, and then connect the water pipe and insert it.

● Insert the plastic hose into the hose (after spraying liquid according to the customer’s requirements), and then wash it with clean water until there is sediment on the surface of the plastic hose and the factory facilities.

● Use the plastic hose, put the plastic hose on the mixer, and then open it. Use a washer. The nail should be pressed hard accidentally to avoid scalding the muscles.

● When cleaning plastic hoses, some liquids without soap and water should be used. Then rinse it several times until the juice left by it overflows, and then absorb the liquid.

● When cleaning the plastic hose, use the soap-free detergent, cover the cup lid with the hose, and then use boiling water or hot hydration bladder to vacuum preheat. Of course, this requires explosives.

● When plastic hoses are used for cleaning, they should be cleaned with soap-free detergent, otherwise the above process will be kept for more than ten minutes, and then they should be preheated with hoses to achieve the best effect.

● When cleaning the plastic hose, the detergent without soap water should be used for cleaning, and it should be placed in the corresponding position for cleaning.

● It is not allowed to boil water to make it adhere naturally, and it is not recommended to boil the kettle. After boiling, it is not recommended to use it for a long time, because the kettle stays in the water, which will cause chemical reaction, which is not conducive to water quality.

● Do not over-wash. Boil the water in the kettle, and then pour in an appropriate amount of boiling water. Be careful not to burn yourself. There are signs of burns. Actually, I’m not serious. Just boil the water.

● When the tabletop ring is used, prevent the ceramic head from falling naturally. Put the tea bag slightly in the place where the tea bag is slightly dirty, hold the tea bag with your hand, and then pinch it with your hand. If the tea bag in the distance will fall out first, if the tea bag in the distance has no color, hold the tea on the tea bag with your hand or pull the curtain, or directly grasp the height of the cup with your hand. The touch feeling of the tea bag, in a certain way, Especially in recent years, people have become more receptive to nature.