SBS Management cadre safety production knowledge training

The content of safety production knowledge training is our country’s basic legal system for production safety. my country’s safety production policy: safety first, prevention first, and the principle of comprehensive management. There are 280 laws and regulations on production safety and labor protection that I have formulated over the past 50 years. 

Safety production knowledge training content-safety management basis.

1.Security terms.

It includes: Safe production; intrinsic safety; safety management; accidents; the hidden danger of accident; unsafe behaviors; violation of command; operation in violation of regulations; the four principles of not letting go; three violations; three-level safety education; four do not hurt; three understandings and four meetings; occupational safety; danger; hazardous chemicals; major hazard sources.

2. Safety colors and safety signs

Our country stipulates the meaning of red, blue, yellow, and green. Red: prohibit, stop; blue: instructions, regulations that must be followed; yellow: warning, attention; green: prompt safe passage.

3. Safety production knowledge training content-safety and fire prevention

understand fire hazards, understand fire prevention measures, understand fire fighting methods, understand fire escape methods, report fire alarms, use fire extinguishers, can put out first fires, and organize the evacuation.

Fire propaganda will be carried out.

(1)Classification of fires. It includes class A-D fires1. Class A-D fires
(2) The three elements of fire, Material combustion must meet three conditions and The type of ignition source.
(3) Measures to prevent fire

Before a fire occurs, measures to prevent the ignition of the fire source in advance are the most fundamental fire prevention measures. This measure is to effectively and appropriately manage the fire-dangerous substances and the ignition source with ignition energy. They cannot cause fire conditions.

4. the content of safety production knowledge training-safety and explosion-proof

(1). The concept of explosion limit:

Combustible gas, combustible liquid-vapor or a mixture of combustible dust and air, not explosive at any mixing ratio, but a fixed concentration range, different combustibles have different fixed concentration ranges, usually combustible gas, combustible liquid-vapor, The volume percentage of combustible dust in the air is expressed, the lowest concentration that can produce an explosion is called the lower explosion limit, and the highest concentration is the upper explosion limit.

(2) Explosion pressure

The pressure generated when a mixture of flammable liquid-vapor or combustible dust and air, or explosives ignites and explodes in a closed container, is called the explosion pressure, and the maximum value of the explosion pressure is called the maximum explosion pressure.

5. Safety production knowledge training content-basic knowledge of safety

(1) Work at heights
(2)The lowest landing point
(3)Safety belts, protection products for workers working at heights to prevent fall injuries and deaths are composed of belts, rope pens, and metal accessories, collectively referred to as safety belts.
(4)Use and inspection of seat belts. The seat belt should be hung high and low, and take care to prevent swinging and collision.
(5)Safety regulations for high-altitude operations

A safety ticket for high-altitude operations must be obtained, scaffolding must be fastened, and safety requirements must be met, safety helmets and seat belts must be worn, and someone must be responsible for supervision.

When climbing upwards, do not pull unfixed objects, and do not throw debris from a high place to the ground at will.